Zipp Vuka Riser Kit - 2010


Availability: Out of stock

Be the first to review this product

Quick Overview

With this kit you will be able to lift the carbon fiber arm rests by a total of 8mm in increments of 4mm.

Zipp Vuka Riser Kit - 2010

Double click on above image to view full picture

Zoom Out
Zoom In


These extruded aerofoil adjustment risers are specially designed to fit between the carbon arm rest cups and the wing horizontal plate or directly between the bullet and the carbon arm rests (see image). This riser kit may be used on either the Vuka Aerobar or the Vuka Clip.

Each kit contains 2 x 4mm risers and 2 x 8mm risers, 4 x M5 x 12mm button-head bolts and 4 x M5 x 16mm button-head bolts. All bolts have a washer. One kit per bar or clip.


  • Requires a 3mm hex wrench
  • Remove the pads and undo the two retaining bolts.
  • Select the riser adjustment you wish to make (4mm or 8mm), insert the riser between the wing extension plate and the carbon arm rest, select the corresponding bolt length, apply a thin anti-seize coating (Al - steel) to the new bolts and tighten. Do not over-torque.
  • Replace the foam pads and race away.

Weight = 39g (with all parts)